Invacare Robin Ceiling Hoist

Face to Face hoisting just got a whole lot easier!

The Invacare Robin can be used in any track, even those already fitted...just tell us which existing hoist is fitted and we will provide a comprehensive quote!

The unique design of the Robin Ceiling Hoist, from Invacare, means that there is no metal spreader bar to attach a sling to. This removes the confrontational aspect that a user may experience, from the spreader bar, during the hoisting process.

A strap at each end of the hoist motor provides the connection point to a loop type sling and then the straps raise and lower the user in a safe, controlled manner.

Controlled via an electric handset the Robin ceiling hoist is easy to operate and includes the following features:-

• The two strap design gives unsurpassed stability and comfort during the transfer and improved client and carer contact.
• Smooth soft stop start feature. improves the positioning experience
• Charge hoist through handset when not in use.
• Hoist removes easily from rail if required in other room.
• Emergency stop/lower function.
• Ease of movement along the rail
• Advanced rail system for complex building requirements and ease of installation.

The Robin hoist weighs just 7 KG but delivers a Safe working load of 200Kg (31.5 Stone).

We are so confident of the product they provide a 3-year warranty on all parts except the battery and parts susceptible to normal wear and tear or misuse i.e. lift tape, handset etc.

Options:-

• Traverse motor – powers hoist along the rail via the handset
• Digital weigh scale
• Spreader attachment
• Stretcher attachment
• Fixed rail and gantry rail configurations
• Universal trolley to fit Robin Hoist on other manufacturer's rail system.

Technical Information

• Strap gateway self - adjusts automatically to size of client.
• Strap connection hooks lock when lift starts to raise the user.
• Handset Cable disengages to safeguard against damage to handset and circuit if hoist is pulled along via hand control.
• Blue light illuminates permanently when hoist is active and is designed to flash if the battery charge is discharged to a level where it requires charging.
• External plug in emergency battery.
• Function control buttons on hoist as well as handset.
• Lifts per charge; approximately 40. (user weight 85 kg, 50 cm range of up/down movement).
• Voltage between battery/hoist; 24V DC.
• Electrical connection of charger: 230V AC 50 HZ.

Larger the rail profile the
greater the distance the fixing
points for brackets are set.

Range of curves allow for
installation flexibility